News Center
Your current location：
Home--Industry News
Plate spring equipment is used for a variety of automotive spring heat treatment equipment, variety, wide application, can effectively improve the work efficiency, then it is how to improve efficiency? We may wish to understand from its own characteristics.
1, the heating position can be controlled freely, will not need to heat the location of excessive heat, to meet the special requirements of the workpiece heat treatment (such as: gear, sprocket tooth surface quenching, bar partial processing).
2, the heating rate, the general heat treatment (such as quenching, annealing) under normal circumstances heating time of not more than 10 seconds / month, to solve the traditional heat treatment process due to the long heating time caused by the oxide layer is too thick problem.
3, plate spring energy-saving equipment, than the original tube high-frequency machines, gas stoves, electric stoves and other energy-saving three-quarters. Simple operation, that is, that will learn, work without open flame, no high temperature, high pressure (induction loop voltage is 36V), with good security.
4, quenching, welding area 1mm2-1cm2 between the deformation to allow a small amount of ultra-fast quenching requirements, welding of the workpiece, with this machine can get the best results.
5, the spring device using special microcomputer software, automatic frequency tracking, with fault self-diagnosis function
6, can be heated welding minimum Φ0.1mm, fine as hair metal.
7, small size, light weight, will not take up too much production space, may at any time move the work position to facilitate production needs.
